Textron PT-3500, Руководство оператора

Страница: 108 / 136

Revolution Series PT-3500 / PT-7500 Puller Tensioner Page 100
Maintenance
Hydraulic Power Engine
All maintenance to the engine should be
done in according to the instructions
manual.
Engine Models:
PT-3500: V2607CR Tier 4
PT-7500: V3800T
Keep all fluids at their proper level
.
(See engine
m fluid levels.)
CAUTION: Never add ETHER to fuel to start cold
engine. Ether WILL damage small diesel engines.
Use available block heater as needed.
CAUTION: Do not exceed 50% of anti-freeze in the
coolant. More anti-freeze will damage small diesel
engines.
Maintenance Notes:
(See Preventive Maintenance Schedule section for full details.)

Break-In Period: The engine oil and oil filter should be replaced after the first 50 hours of
operation, and as outlined in the Preventive Maintenance Schedule section and engine

Always premix the correct coolant (50/50) before adding to cooling system-
see SAE-J1034
.
Too much antifreeze can damage engine components.

Engine oil should be MIL-L-2104C or have properties of API classification CF or higher.
(For
- Appendix A.)

When replacing hoses, fittings or other components, clean thoroughly and then assemble
carefully.

Always follow all federal, state, local, and environmental laws and regulations, to
include but not limited to OSHA, EPA, and Hazard Communication Act, with regard to
the storage, maintenance, and disposal of engine oils, coolants, and other chemicals
used in the maintenance of described mechanical equipment.