Textron PT-3500, Руководство оператора

Страница: 93 / 136

Revolution Series PT-3500 / PT-7500 Puller Tensioner Page 85
Maintenance
Hydraulic System
Absolute cleanliness of the hydraulic system is
a must. The smallest amount of foreign
material in the system can cause extensive
damage to the pump, motor(s), or valves.
Reilly has taken every precaution to
assure that each component and fitting was
thoroughly cleaned and the system purged
before
this machine was delivered.
Therefore, maintenance of the system should
be carried out with extreme care.
Maintenance Notes:
(See Preventive Maintenance Schedule section for full details.)

Break-In Period: The hydraulic filters should be replaced after the first 25 hours of operation,
and as outlined in the Preventive Maintenance Schedule section.

Only use ISO Grade 32 hydraulic fluid.

When adding hydraulic fluid, be sure to wipe all dirt and grime from around reservoir filler
cap before removing.

Clean hoses, fittings, and other components thoroughly prior to replacing, and then
assemble carefully.

Always ensure that hydraulic fluid and system have cooled prior to attempting maintenance.

Always follow all federal, state, local, and environmental laws and regulations, to include
but not limited to OSHA, EPA, and Hazard Communication Act, with regard to the storage,
maintenance, and disposal of hydraulic fluid and other chemicals used in the maintenance
of described mechanical equipment.