Textron PT-3500, Руководство оператора

Страница: 42 / 136

Revolution Series PT-3500 / PT-7500 Puller Tensioner Page 40
Operation
Operator Controls
**For control locations see Operator Control Panel Section on page 20.
Automatic Levelwind Controls
(cont.)

Set the levelwind starting direction by
pressing and holding the [LEV WIND DIR]
button for three seconds. The
arrow indicators in the center
of the
screen will toggle
showing which way
the levelwind is
programmed to move.

The system will now automatically manage
the levelwind functions. However, the
operators can adjust the
speed of the levelwind, if
needed, by rotating the
levelwind
speed
control knob CW to
increase and CCW to
decrease speed.
Spider System Levelwind:
The spider system levelwind controls are the
same as rope drum levelwind. However, the
operator must first ensure that the
spider system and automatic
levelwind controls are enabled
and activated on the system
control display before the controls will transfer
to the spider system levelwind. For more
information on the spider system operations,
see the Spider System section under
Operations.
NOTE: The operator will need to set the initial
direction (Right/Left) of the levelwind before
beginning operations. The direction will depend on
which side of the drum the rope end leading off is
located.