Textron PT-3500, Руководство оператора

Страница: 33 / 136

Revolution Series PT-3500 / PT-7500 Puller Tensioner Page 31
Operation
Operator Controls
**For control locations see Operator Control Panel Section on page 20.
System Control Panel
SETUP
(Cont.)
DRUM
(Cont.)
To alter the drum configuration to allow for
alternative drum/reel sizes first push the [EDIT]
button located adjacent to the corresponding
field you wish to edit. Next use the [+] and [-]
buttons to dial up or down the width/diameter
for the drum or reel. Once set, push the option
button for [SAVE] to lock in that value.
To return to the SETUP Screen press the [BACK]
button.
ROPE
This screen provides the operator with a way of
setting the rope size configuration for the
machine. This is an important setting that the
levelwind requires to ensure proper rewind
laying of the rope or cable onto the drum or reel.
By default the system will retain the last setting
used, and the system contains all most common
size rope diameter sizes.
LOGGED DATA
This screen allows the operator access to the
recorded system and operations data to thereby
be able to export and transfer the data to a
portable storage device such as a USB.
(See USB
Interface Section for steps on transferring data.)
Once on the screen the operator can view the
total Free and Used memory space for the
onboard memory storage. This screen also
shows the mount path for the USB device once
connected, as well as the status of the data
transfer once initiated. The [MOVE DATA TO
USB] button is a soft touch screen button that
requires the user to touch the screen to initiate
the transfer.
NOTE: When the configuration size is changed for
either the STANDARD DRUM or RECONDUCTORING
DRUM the setting will stay in the system for that drum
setting until it is changed.