TEUPEN LEO 27T, Перевод инструкции по эксплуатации

Страница: 69 / 312

Transportation and storage
07/05/2018 69
1
1 2
3
Fig. 65
2. Hook lashing chains (Fig.65/1) to the attachment points of the working plat-
form (Fig.65/2) and the auxiliary frame (Fig.65/3) at all four attachment points.
3. Make sure that all four lashing chains are connected correctly.
4. Using the crawler chassis, lift the working platform until the function stops auto-
matically and the lashing chains are tensioned (
Ä
Chapter 7.12 „Crawler
chassis, height- and width-adjustable”, on page 113).
1 2
1
Fig. 66
5. Screw the supplied lighting system (Fig.66/1) to the working basket and con-
nect the connector of the spiral cable (Fig.66/2) to the 12V socket of the truck.
WARNING
Risk of injury from falling parts!
While the transport vehicle is driving, loose or non-attached parts can fall onto the
road and injure persons and/or damage other vehicles.
– Before pulling away, always check the transport vehicle and working platform
for loose or non-attached parts and remove them.
– Seal all stowage spaces and flaps.