manualshive.com logo in svg

TEUPEN LEO 27T, Перевод инструкции по эксплуатации

Поделиться
Скачать
TEUPEN LEO 27T Скачать руководство пользователя страница 11

General

07/05/2018

11

1.4

Limitation of liability

All data and notes in these operating instructions have been compiled in compli-
ance with the applicable standards and regulations and based on the technological
state of the art as well as on our many years of knowledge and experience.

The manufacturer shall accept no liability for damage caused by:

n

Failure to observe these instructions

n

Improper use

n

Deployment of untrained personnel

n

Improper assembly, commissioning, operation or maintenance of the machine

n

Operation of the machine with faulty safety equipment or improperly attached
or inoperative safety devices and protective barriers

n

Unauthorised conversion

n

Technical modifications

n

Insufficient monitoring of the machine parts subject to wear

n

Improperly performed repairs

n

Use of unapproved spare parts

n

Unauthorised modification of a component’s software

n

Disasters caused by foreign bodies or acts of God

The actual scope of supply may differ from that described and shown in these in-
structions in the case of special designs, where additional options have been
ordered or as a result of the latest technical changes. The obligations entered into
as part of the supply contract, the general terms and conditions and the manufac-
turer’s delivery conditions, and the legal provisions as applicable at the time of con-
cluding the contract shall apply.

1.5

Copyright

The content of these instructions is subject to copyright.

Its use is permitted within the scope of machine operation. Any use beyond this
(electronic or manual), in whole or in part, including translation into another lan-
guage, requires the manufacturer’s written consent.

All rights to these instructions held by Teupen Maschinenbau GmbH.

1.6

Warranty conditions

The warranty terms are included in the manufacturer’s

general terms and conditions.

1.7

Notes regarding the warranty card

To ensure that any warranty claims can be smoothly processed among customer,
service partner and Teupen, it is essential that the warranty card included at the
beginning of the machine record be filled in and sent back to Teupen immediately

Содержание LEO 27T

























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды