TEUPEN LEO 27T, Перевод инструкции по эксплуатации

Страница: 105 / 312

Operation
07/05/2018 105
1
2
3
Fig. 126
2. Ensure that the locking lever (Fig.126/1) is positioned fully upright and the
locking device is engaged in the upper-most position (Fig.126/2).
3. Pull the locking pin (Fig.126/3) upwards until the outrigger can be pivoted
freely.
4. Pivot the outrigger until it is in the narrow or wide position.
NOTICE
Always ensure that the tooth systems are free of dirt. If necessary, clean the tooth
systems.
1 2
3
Fig. 127
5. Using your other hand, pull the locking device (Fig.127/1) upwards in the direc-
tion of the arrow and push the locking lever (Fig.127/2) down fully.
6. Let go of locking device (Fig.127/1).
7. Ensure that the locking lever (Fig.127/2) is all the way down and the locking
device is engaged in the lowest position (Fig.127/3).
1
2
3
Fig. 128
8. If the outrigger is set to the transport position, you must ensure that the locking
lever (Fig.128/1) is positioned fully upright and engaged in the upper-most po-
sition (Fig.128/2).
9. Ensure that the securing pin (Fig.128/3) is pushed in fully.