TEUPEN LEO 27T, Перевод инструкции по эксплуатации

Страница: 186 / 312

Maintenance
186
07/05/2018
8.2.3 Checking/topping up hydraulic oil
Personnel:
n Qualified personnel
Protective equipment:
n
Occupational safety clothing
n Safety boots
Materials:
n
Hydraulic oil (
Ä
Chapter 4.8 „Consumables”, on page 40)
1. Move machine to transport position ( Ä Chapter 7.16 „Moving the bracing into
the transport position”, on page 126).
2. Make sure that the machine is aligned horizontally.
3. Switch off the machine (
Ä
Chapter 7.3 „Switching the machine on/off”, on page
73).
1
Fig. 237
4. Unscrew the cover (Fig.237/1).
1
2
3
Fig. 238
5. Check the oil level in the inspection glasses for maximum (Fig.238/1) and min-
imum (Fig.238/2) level.
6. The hydraulic oil level must reach the maximum marking (Fig.238/1). If neces-
sary, top up the hydraulic oil.
7. To do so, unscrew and remove the cap (Fig.238/3).
8. Fill the hydraulic oil up to the maximum marking on the inspection glass
(Fig.238/1).
9. Screw the cap (Fig.238/3) back on.
10. Collect any leaked hydraulic oil and dispose of it properly.
1
Fig. 239
11. Screw the cover (Fig.239/1) back on.