manualshive.com logo in svg

TEUPEN LEO 27T, Перевод инструкции по эксплуатации

Поделиться
Скачать
TEUPEN LEO 27T Скачать руководство пользователя страница 166

Operation

166

07/05/2018

7.22

12-V auxiliary drive

Personnel:

n

Trained persons

Protective equipment:

n

Occupational safety clothing

n

Safety boots

n

Safety helmet

If the machine has stopped because the fuel has run out, it can still be operated
using the 12-V auxiliary drive.

This function is designed solely for use in the event that the machine stops be-
cause it has run out of fuel. It allows the machine to be moved into transport posi-
tion as quickly as possible.

NOTICE

The auxiliary drive is neither an emergency mode nor a service mode.

It can be operated from the working basket only.

All safety equipment remains fully active in this mode.

1. Make sure that the combustion engine and the electric drive are switched off.

2. Switch on the radio control (

Ä

Chapter 7.3.1 „Switching the radio control on/off”,

on page 73).

1

Fig. 211

3. Press and hold the auxiliary drive button  (Fig.211/1) while simultaneously op-

erating the machine using the radio control.

NOTICE

Limited battery capacity!

–

Avoid travelling longer distances using the crawler chassis.

–

When moving the platform, always choose the shortest possible path to the
transport position.

Содержание LEO 27T

























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды