Tennant 92 GR, Руководство оператора

Страница: 30 / 79

2-15
92GR MM188 (10---87)
TRANSPORTING MACHINE
PUSHING OR TOWING MACHINE
The machine may be pushed from the front or the
rear, using the bumpers provided, only after placing
the rear wheel on a dolly.
The machine may be towed only from the rear. Do
not pull on the front bumper.
ATTENTION! Do not push or tow the machine
without placing the rear wheel on a dolly or the
machine hydraulic system may be damaged.
MACHINE JACKING
1. Stop the engine and engage the machine
parking brake.
WARNING: Always stop the machine on a
level surface, stop the engine and engage
the parking brake before working on the machine
to keep it from rolling.
2. Empty the debris hopper before attempting to
jack the machine up.
3. Block the tires which are not being jacked up to
secure the machine’s position.
WARNING: Always block the machine tires
before jacking the machine up to keep it
from rolling off jack.
4. Use a scissors or hydraulic---type jack of
adequate capacity to raise the machine. Jack
up the machine only at the designated
locations.
WARNING: Jack machine up only at the
designated locations to keep it from
tipping.
The front jacking locations are the bottom edge of
the machine frame next to the front machine tires.
A
01455
FRONT JACKING LOCATION (RIGHT SIDE
SHOWN)
A. Jacking Location
The rear jacking location is the bottom of the rear
edge of the machine frame.
A
01456
REAR JACKING LOCATION
A. Jacking Location
5. Block machine up with jack stands or similar
devices to make sure machine is secure.
WARNING: Always use jack stands or
similar devices to hold the machine up.
Scissors, ratchet, cable, or hydraulic--type jacks
may slip or leak internally allowing the machine to
lower or fall, crushing anything under it.