Tennant 92 GR, Руководство оператора

Страница: 28 / 79

2-13
92GR MM188 (10---87)
4. Move the main brush power lift lever into the
“up” position.
5. Move the main brush speed lever into the “off”
position.
6. Move the side brush lever into the “off”
position.
7. Turn the operating lamps off if used.
8. Place the throttle lever in the “idle” position.
9. Engage the machine parking brake.
10. Turn the ignition switch key to the “off” position.
Remove the key from the switch.
WARNING: Always park on a level surface,
stop the engine, and engage the parking
brake before leaving the machine unattended to
keep it from creeping or rolling.
POST OPERATION CHECKLIST --- ENGINE
STOPPED
Check skirts for damage, wear, and adjustment.
Check for wire or string tangled on brushes.
Check for leaks.
OPERATION ON GRADES
Drive the machine slowly on grades. Use the service
brakes to control machine speed.
WARNING: Always travel slowly on grades
to prevent machine from becoming
unstable. When going down a grade, use service
brakes to control speed. Do not operate machine
on greater than maximum rated climb and
descent angles.
The maximum rated ramp climb and descent angle
is 15
_
with an empty hopper, and 12
_
with a full
hopper.