TSP Edge User’s Manual
40-400-00065, Rev. E
18
Units
Unit Configuration
Each Edge must be defined as a “Unit” in the configuration software. The Unit screen
(see Figure 14) is used to define the connection for communicating to the Edge, the
card types installed in the unit, and specific information for the Ports and Channels on
each card.
By clicking New on the Units menu, the prompt “Enter New Unit Name” appears.
For demonstration purposes, the name “Unit Example” is used in this manual. After
entering the name for your unit, the Unit screen is displayed (see Figure 14) with the
unit name in the title bar.
Figure 14. Unit Screen
Note the tabs on the
Unit
screen:
General
(Connection for Serial or Network
control),
Slot
s 1 - 4 (for card types), and
Network
(for assigning an IP address to the
unit).
Содержание TSP Edge
Страница 1: ...TSP Edge User s Manual 40 400 00065 Rev E ...
