Telecast CH3-MPS-95VD-2ST-304, Руководство пользователя

Страница: 35 / 86

Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver Sys
CopperHead KA-
The CopperHead KA-F790 Camera Unit Indicator Panel has a series of LED displays that
monitor the various signal paths between the Camera Unit and the Base Station.
For signals remain constant such as time code and video the LED remains on as a steady green.
For signals that fluctuate such as audio
If the LED is off either the signal has been lost or it
Please see the Overview Diagram in Appendix
The LED indicators on the left side of the
panel indicate signal paths from the
Camera Unit to the Base Station
CopperHead FS790 ProHD Transceiver System User Guide
Page 33
-F790 Camera Unit Indicator and Control Panel
Camera Unit Indicator Panel has a series of LED displays that
monitor the various signal paths between the Camera Unit and the Base Station.
t such as time code and video the LED remains on as a steady green.
For signals that fluctuate such as audio, the LED will reflect the varying signal activity
If the LED is off either the signal has been lost or it is not in use.
Diagram in Appendix 4
The LED indicators on the left side of the
panel indicate signal paths from the
Camera Unit to the Base Station.
Right side LEDs indicate signal paths from the
Base Station to the Camera Unit.
1) Intercom Control Group
Intercom Talk active indicator controlled by switch
Please see Section 6.4 for information on use of the Intercom
Control Group
2) Intercom Headset Level Control
3) Tally Indicator Light
Indicates the status of the GPI/Tally 1 signal
Off when the signal is not present
Bright Red when the signal is present
4) SDI Digital Video Signal
Monitors camera SDI Video to Base Station and SDI return
video to the Camera Unit
5) Video/Return – Analog Video Signals
Monitors Camera Monitor video from the Ca
Base Station and Return Video to the Base Station from the
Camera Unit
6) Sync
Monitors Genlock (one way from Base Station to Camera)
7) Prompt
Monitors a Prompter Feed (one way from Base Station to
Camera
tem User Guide – 110124V4JH
Indicator and Control Panel
Camera Unit Indicator Panel has a series of LED displays that
t such as time code and video the LED remains on as a steady green.
activity...
indicate signal paths from the
Base Station to the Camera Unit.
Talk active indicator controlled by switch
for information on use of the Intercom
Indicates the status of the GPI/Tally 1 signal
Monitors camera SDI Video to Base Station and SDI return
Camera Monitor video from the Camera Unit to the
Base Station and Return Video to the Base Station from the
Genlock (one way from Base Station to Camera)
Prompter Feed (one way from Base Station to