Telecast CH3-MPS-95VD-2ST-304, Руководство пользователя

Страница: 39 / 86

Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver Sys
Area D – Signal Strength Indicators/Setup
Area E – Status/Power Indicators
Note: Hybrid Power Indicators are
present only on a powered base
station unit
CopperHead FS790 ProHD Transceiver System User Guide
Page 37
Signal Strength Indicators/Setup
11) Signal Strength Readout in dBm
This display changes between display modes
12) Select Button
Chooses between three modes of operation
13) Readout Function Indicator
BASE RX – Optical Link signal strength received at Base
Station from Camera Unit
CAM RX – Optical Link signal strength received at Camera
from Base Station
DIAG – Digital display is in Diagnostic mode
For details on how the setup/Diagnostic functions operate
please see Page 64.
Status/Power Indicators
Note: Hybrid Power Indicators are
powered base
14) Status Indicators
BASE POWER
- indicates the status of all power levels in the
Base Station
Green when all power levels are normal.
Red when any power level is not normal.
SYSTEM LOCK
- indicates that the
communicating with the Camera Unit.
Green when communicating with Camera Unit
Red when it is not communicating with the
FIBER LINK
- indicates the optical power status of the
Station and camera
Green when both the Base Station and camera optical power
are within a normal range.
Red when both the Base Station and camera optical power are
not within a normal range
Orange when either the Base Station or camera optical power
are not within a normal range
ALARM
- indicates that some error condition exists in either
the Base Station or the camera.
Red if there is a Base Station error. Refer to the
DIAG for details on the error.
Orange if there is a camera error. Refer to CAM DIAG for
details for the error.
tem User Guide – 110124V4JH
between display modes when selected
Optical Link signal strength received at Base
Optical Link signal strength received at Camera
Digital display is in Diagnostic mode
gnostic functions operate
indicates the status of all power levels in the
indicates that the Base Station is
with Camera Unit
communicating with the Camera Unit
indicates the optical power status of the Base
and camera optical power
and camera optical power are
or camera optical power
indicates that some error condition exists in either
error. Refer to the Base Station
there is a camera error. Refer to CAM DIAG for