Telecast CH3-MPS-95VD-2ST-304, Руководство пользователя

Страница: 54 / 86

Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver System User Guide – 110124V4JH
Page 52
Connectors into and out of the CopperHead FS-790 Base Station
11
Video (Analog) Out
BNC Connector -Typically used for SD Monitoring Video return from the Camera
12
Prompter In
BNC Connector – SD Video feed from external prompter system originating at Base Station location and
displaying at Camera location
13
SDI Out A & B (this carries the HD feed from the camera)
BNC Connectors – Two identical video feeds from the camera – typically one may be used for local HD
monitoring and one is fed to the Production Switcher environment.
14
SDI In
BNC Connector – Typically used to send HD return video to the camera – an example is program out from
the Production Switcher
15
Audio In- Multi-Pin Connector
DB25 – 25 pin Connector follows the Tascam TDIF standard. The CopperHead FS-790 Transceiver
System accommodates one Audio Channels Line Level. Please see Page 75 for sample wiring.
16
Audio Out- Multi-Pin Connector
DB25 – 25 pin Connector follows the Tascam TDIF standard. The CopperHead FS-790 Transceiver
System accommodates up to two Audio Channels at Line Level. This connector handles Program audio
from the Camera location. Please see Page 76 for sample wiring.
17
&
18
Intercom Connectors #1 & #2
XLR 3 pin Connectors (Male or Female) depending on configuration. One of two options will be installed
(RTS or Clear-Com).
20
12V Terminal Block
Terminal Block – bare wire connector. This can be used in place of the ADAP power connection in
installations that have 12V power distributed as part of their infrastructure. Do not use this at the same time
as the ADAP power connection.