About the LED indicator
D
• Lights red while transmitting.
• Lights green while receiving a signal, or when the squelch
is open.
A-7148H-2EX
Printed in Japan
© 2014 Icom Inc.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
Thank you for choosing the IC-F5360D
vhf
digital
transceiver
or IC-F6360D
uhf
digital
transceiver
.
READ ALL INSTRUCTIONS
carefully and complete
-
ly before using your transceiver.
INSTRUCTIONS
VHF DIGITAL TRANSCEIVER
Iç-F6360D
UHF DIGITAL TRANSCEIVER
Iç-F5360D
SUPPLIED ACCESSORIES
PANEL DESCRIPTION
FUNCTION DISPLAY
Turning power ON
D
Push [
➥
] to turn ON the power.
BASIC OPERATION
This instruction sheet includes some functions which are
usable only when they are preset by your dealer. Ask your
dealer for details.
See the operating instructions for details of other func
-
tions, and IDAS™ NXDN™ system operations. Ask your
dealer for details.
FOREWORD
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor
-
porated (Japan) in Japan, the United States, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
IDAS and the IDAS logo are trademarks of Icom Incorporated.
NXDN is a trademark of Icom Incorporated and JVC Kenwood Corporation.
All other products or brands are registered trademarks or trademarks of their
respective holders.
q
SIGNAL STRENGTH INDICATOR
Displays the relative receive signal strength.
w
LOW POWER ICON
Appears when low output power is selected.
• When the battery charge decreases to a specified level, low
power is automatically selected.
e
AUDIBLE ICON
Appears when the channel is in the ‘audible’ (unmute)
➥
mode.
Appears when a matched signal is received.
➥
r
SCRAMBLER ICON
Appears when the Voice Scrambler function is ON.
t
SCAN ICON
Appears while scanning.
y
MESSAGE ICON
Appears when a received message (Short Data Mes
-
➥
sage or Status Message) is stored in the stack mem
-
ory.
Blinks when an unread message is in the stack mem
-
➥
ory.
u
BELL ICON
Appears when a matched signal is received, depending
on the presetting.
i
GPS ICON
Appears when position data is received.
o
HORN ALERT ICON
Appears when the Horn Alert function is ON.
!0
PUBLIC ADDRESS ICON
Appears when the Public Address function is ON.
!1
ALPHANUMERIC READOUT
Displays the operating channel number, channel name,
Menu contents, DTMF code, and so on.
• The display mode automatically switches between one line and
two lines.
!2
KEY ICONS
Displays the assigned function of the [P0], [P1], [P2] and
[P3] front panel keys.
!3
SCAN TARGET ZONE ICON
Appears when the scan target zone is selected.
!4
EXTERNAL SPEAKER ICON
Appears when the external speaker is connected.
!5
AUX A ICON
Appears when the AUX A function is ON.
!6
AUX B ICON
Appears when the AUX B function is ON.
!7
SCAN TARGET CHANNEL ICON
Appears when the scan target channel is selected.
!8
OPERATOR SELECTABLE TONE ICON
Appears when the Operator Selectable Tone function is
ON.
[VOL]
LED indicator
Up/Down keys
Power switch [ ]
Dealer-assignable keys*
([
R
]
,
[P0]
,
[P1]
,
[P2]
,
[P3])
*Ask your dealer for details.
Function display
Speaker
Microphone
connector
Microphone
Microphone hanger
and screw set
DC power cable
Mounting bracket
Flat washers
Spring washers
Bracket bolts
Mounting screws
(M5
×
12)
Self-tapping screws
(M5
×
16)
Nuts
IC-F5360D
CONTACT
①縦横比を52×19にする。
②拡大200%
③拡大150%
q w e r t
y
u
i
o !0
!2
!1
!3
Receiving and Transmitting
D
Receiving:
Select a channel.
q
Push [CH U] or [CH D].
➥
Push one of the direct channel select keys, [DR 1] to
➥
[DR 5].
Push the ([1] to [9] or [0]) digit keys of the optional
➥
DTMF microphone to enter the channel number when
the Channel Entry function is assigned to the keypad,
or after pushing [CHEN].
When receiving a call, rotate [VOL] to adjust the audio
w
output level to a comfortable listening level.
For your reference:
[CHEN]: Channel Entry
[CH U]: CH/GID Up
[CH D]: CH/GID Down
[DR 1]: Direct CH/GID 1 [DR 5]: Direct CH/GID 5
See the operating instructions for details.
Transmitting:
Wait until the channel is clear to avoid interference.
Take the microphone off hook.
q
• While scanning, the scan stops.
Wait for the channel to become clear.
w
• The channel is busy when the LED indicator lights green.
While holding down [PTT], speak at a normal voice level.
e
Release [PTT] to receive.
r
IMPORTANT:
To maximize the readability of your signal:
1. After pushing [PTT], pause briefly before you start
speaking.
2. Hold the microphone 5 to 10 cm (2 to 4 inches) from
your mouth, then speak at a normal voice level.
!4
!5 !6 !7 !8
