background image

REAR PANEL CONNECTION

Antenna

q

 

ANTENNA CONNECTOR

Connects  to  an  antenna. 
Contact your dealer about 
antenna  selection  and 
placement.

q

Connects to a GPS antenna.
3.3 V DC output.

R

w

 

EXTERNAL SPEAKER 

JACK

Connect a 4–8 

˘

  

external speaker.

e

 

D-Sub 15-pin

Connect an external unit.

r

 

MICROPHONE HANGER

The  microphone  on/off  hook 
functions can be used without 
the vehicle’s ground.

t

r

y

Optional speaker

e

w

t

 

IGNITION LEAD

Connects to a ignition line.

R

Do not put a pressure to 
this lead.
Binding to the DC power 
cable is recommended.

Microphone

y

 

DC POWER RECEPTACLE

Connects to a 12 V DC battery. 
Pay attention to polarities.

R

 WARNING! NEVER

 connect 

to  a  24  V  battery.  This  could 
damage the transceiver.

Solder

NOTE: 

Use the terminals as shown 

below for the cable connections.

Crimp

Black

Red

12V
Battery

R

 WARNING! NEVER

 remove 

the fuse-holder from the DC 
power cable.

Purchase separately 

Connect the microphone hanger to the vehicle’s ground 
for microphone on/off hook functions when the optional 
microphone (HM-152/T) is used.

When the optional microphone (HM-152/T) is used:

r

r

 

GPS ANTENNA CONNECTOR

CAUTION:

 When no antenna 

is  connected,  attach  the  cap 
to the connector.  Otherwise, 
an  electrical  shock  or  burn 
may occur.  

MOUNTING THE TRANSCEIVER

The universal mounting bracket supplied with your trans

-

ceiver allows overhead mounting.
•  Mount the transceiver securely with the 4 supplied screws 

to a thick surface which can support more than 1.5 kg.

Flat washer

Felt*

Spring washer

When using
self-tapping screws

Felt*

*Felts reduce the vibration effects.

A key element in the performance of any communication 
systems is an antenna. Contact your dealer for more infor

-

mation regarding antennas and how to install them.

ANTENNA

A fuse is installed in the supplied DC power cable. If a fuse 
blows or the transceiver stops functioning, track down the 
source of the problem if possible, and then replace the dam

-

aged fuse with a new rated one.

 Fuse rating: 20 A

 

USE

 the 20 A fuse only.

FUSE REPLACEMENT

If the transceiver becomes dusty or dirty, wipe it clean with a 
soft, dry cloth.

DO NOT

 use harsh solvents such as benzene or 

alcohol, as they may damage the transceiver sur

-

faces.

CLEANING

OPTIONS

• OPC-1132/OPC-347 

dc

 

power

 

cable

   OPC-1132: 3 m (9.8 ft)
  OPC-347:  7 m (23 ft)
• 

HM-152/HM-152T/HM-148G/HM-148T 

hand

 

microphones

  HM-152:  Hand microphone
  HM-152T: DTMF microphone
  HM-148G: Self ground heavy duty microphone
  HM-148T:  Self ground heavy duty DTMF microphone
   

 The 10-keypad of this microphone can be used 
for the DTMF code transmission only.

• 

SM-26 

desktop

 

microphone

• 

SP-30/SP35/SP-35L 

external

 

speakers

  Input impedance: 4 

ø

  SP-30: 

Rated input; 20 W, Max. input; 30 W

  SP-35/SP35L:  Rated input; 5 W, Max. input; 7 W

Approved  Icom  optional  equipment  is  designed  for  optimal  perfor

-

mance when used with an Icom transceiver.
Icom  is  not  responsible  for  the  destruction  or  damage  to  an  Icom 
transceiver in the event the Icom transceiver is used with equipment 
that is not manufactured or approved by Icom. 

Some options may not be available in some countries. Please ask 
your dealer for details.

Отзывы: