background image

About the LED indicator

 

D

• Lights red while transmitting.
•  Lights green while receiving a signal, or when the squelch 

is open.

A-7148H-2EX 

Printed in Japan

 

© 2014  Icom Inc.

1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan

Thank  you  for  choosing  the  IC-F5360D 

vhf

 

digital

 

transceiver

 

or IC-F6360D 

uhf

 

digital

 

transceiver

.

READ ALL INSTRUCTIONS

 carefully and complete

-

ly before using your transceiver.

INSTRUCTIONS

VHF DIGITAL TRANSCEIVER

Iç-F6360D

UHF DIGITAL TRANSCEIVER 

Iç-F5360D

SUPPLIED ACCESSORIES

PANEL DESCRIPTION

FUNCTION DISPLAY

Turning power ON

 

D

Push [

 

] to turn ON the power.

BASIC OPERATION

This  instruction  sheet  includes  some  functions  which  are 
usable only when they are preset by your dealer. Ask your 
dealer for details.

See  the  operating  instructions  for  details  of  other  func

-

tions, and IDAS™ NXDN™ system operations. Ask your 
dealer for details.

FOREWORD

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor

-

porated (Japan) in Japan, the United States, the United Kingdom, Germany, 
France, Spain, Russia and/or other countries.
IDAS and the IDAS logo are trademarks of Icom Incorporated.
NXDN is a trademark of Icom Incorporated and JVC Kenwood Corporation.
All other products or brands are registered trademarks or trademarks of their 
respective holders.

q

 SIGNAL STRENGTH INDICATOR

   

Displays the relative receive signal strength.

w

 LOW POWER ICON

 

 

Appears when low output power is selected.

  •  When  the  battery  charge  decreases  to  a  specified  level,  low 

power is automatically selected.

e

 AUDIBLE ICON

 Appears when the channel is in the ‘audible’ (unmute) 

 

mode.
Appears when a matched signal is received.

 

SCRAMBLER ICON

   

Appears when the Voice Scrambler function is ON.

SCAN ICON

   

Appears while scanning.

MESSAGE ICON

 Appears when a received message (Short Data Mes

-

 

sage or Status Message) is stored in the stack mem

-

ory.
 Blinks when an unread message is in the stack mem

-

 

ory.

BELL ICON

 

 

 

Appears  when  a  matched  signal  is  received,  depending 
on the presetting.

GPS ICON

 

Appears when position data is received.

HORN ALERT ICON

 

Appears when the Horn Alert function is ON.

!0 

PUBLIC ADDRESS ICON

 

Appears when the Public Address function is ON.

!1 

ALPHANUMERIC READOUT

   Displays  the  operating  channel  number,  channel  name, 

Menu contents, DTMF code, and so on.

  •  The display mode automatically switches between one line and 

two lines.

!2 

KEY ICONS

 

 

 Displays the assigned function of the [P0], [P1], [P2] and 
[P3] front panel keys.

!3 

SCAN TARGET ZONE ICON

   

Appears when the scan target zone is selected.

!4 

EXTERNAL SPEAKER ICON

   

Appears when the external speaker is connected.

!5 

AUX A ICON

   

Appears when the AUX A function is ON.

!6 

AUX B ICON

   

Appears when the AUX B function is ON.

!7 

SCAN TARGET CHANNEL ICON

   

Appears when the scan target channel is selected.

!8 

OPERATOR SELECTABLE TONE ICON

   

Appears  when  the  Operator  Selectable Tone  function  is 
ON.

[VOL]

LED indicator

Up/Down keys

Power switch [ ]

Dealer-assignable keys*
([

R

]

[P0]

[P1]

[P2]

[P3])

*Ask your dealer for details.

Function display

Speaker

Microphone 
connector

Microphone

Microphone hanger 
and screw set

DC power cable

Mounting bracket

Flat washers

Spring washers

Bracket bolts

Mounting screws 
(M5

×

12)

Self-tapping screws 
(M5

×

16)

Nuts

IC-F5360D

CONTACT

①縦横比を52×19にする。

②拡大200%

③拡大150%

q w e r t

y

u

i

o !0

!2

!1

!3

Receiving and Transmitting

 

D

Receiving:

 Select a channel.

 

q

Push [CH U] or [CH D].

 

 Push one of the direct channel select keys, [DR 1] to 

 

[DR 5].
 Push  the  ([1]  to  [9]  or  [0])  digit  keys  of  the  optional 

 

DTMF microphone to enter the channel number when 
the Channel Entry function is assigned to the keypad, 
or after pushing [CHEN].

 When  receiving  a  call,  rotate  [VOL]  to  adjust  the  audio 

 

w

output level to a comfortable listening level.

For your reference:

[CHEN]: Channel Entry
[CH U]: CH/GID Up 

[CH D]: CH/GID Down

[DR 1]: Direct CH/GID 1  [DR 5]: Direct CH/GID 5
See the operating instructions for details.

Transmitting:

Wait until the channel is clear to avoid interference.

Take the microphone off hook.

 

q

  •  While scanning, the scan stops.

 Wait for the channel to become clear.

 

w

  •  The channel is busy when the LED indicator lights green.

 While holding down [PTT], speak at a normal voice level.

 

e

Release [PTT] to receive.

 

r

IMPORTANT:

To maximize the readability of your signal:
1.  After  pushing  [PTT],  pause  briefly  before  you  start 

speaking.

2.  Hold the microphone 5 to 10 cm (2 to 4 inches) from 

your mouth, then speak at a normal voice level.

!4

!5 !6 !7 !8

Отзывы: