Telecast CH3-MPS-95VD-2ST-304, Руководство пользователя

Страница: 57 / 86

Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver System User Guide – 110124V4JH
Page 55
5.4.Camera Unit Connection Example
Please see the section above for information on these connections.
Camera Unit (Camera Facing Side) to Camera Connections
Figure 24 - Camera Unit (Camera Facing Side) to Camera Connections
Please note that a power adaptor plugged into the Camera Power Connector on the rear of the GY-
HM790 Camera will only power the camera and not the KA-FP790 Camera Unit. To power both units you
must supply power through one of the four methods:
1. Battery attached to Camera Unit
2. Power adaptor attached to Camera Unit
3. Power supplied through a Hybrid Fiber Cable by means of a Power Wafer adaptor
4. Power supplied through a Hybrid Fiber Cable by means of a PowerPlus adaptor
It is possible to power the camera directly through the Camera Power Connector and power the camera
unit via the battery plate if the situation calls for this configuration.