TRANSMITTER KT-19
产品介绍
Introduction
KT-19
遥控系统主要是用来遥控摩托车模型，通过对发射机进行操作，可以分别
实现相对应的马达驱动及舵机摆动遥控控制；发射机采用
6V/DC
供电，摩托车采用
3.7V
锂聚合物电池进行供电。
KT-19 radio system mainly uses for remote control the motorcycle model.
Through operating transmitter, it can succeed in moving the motor system and the
servo respectively. The transmitter will be supplied by 6V/DC, while the receiver will
be supplied by 3.7V li-poly battery.
产品套装：发射机
+
摩托车（接收机）
+USB
线
+
充电器
+
使用说明书。
Product includes: trans motor (reUSB cable + c manual
KT-19
遥控系统使用方法及操作步骤
Instruction of
KT-19
1.
将发射机与摩托车（接收机）靠近；
1. Keep the transmitter and model closer.
2.
将发射机手轮顺时针拧到底，然后按下电源开关
“POWER”
，此时发射机
LED
指示
灯会处于闪烁状态；
2. Turning the steering wheel to the end clockwise, and at the same time press the
POWER, then the LED will be flashing.
3.
打开接收机电源开关，接收机
LED
指示灯会长亮
2
秒时间，然后处于闪烁状态，
同时，无刷电机也会发出
“
滴、滴、滴
”
的响声；
3. Switch on the power of receiver, then the LED of receiver will be lighting for 2
seconds, after that it will be flashing, and at the same time the brushless motor will
be beeping.
