Telecast CH3-MPS-95VD-2ST-304, Руководство пользователя

Страница: 72 / 86

Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver System User Guide – 110124V4JH
Page 70
6.7.Shutting Down the System
System shutdown is simple. The only cautions relate to the Fiber Cable and to the Base Station Remote
Control Panel Cable.
1. To avoid the possibility of looking directly into an active fiber optic port or cable, turn both the
Camera Unit and the Base Station off before disconnecting the fiber from either point.
2. To avoid the possibility of damaging the Camera Remote Control Panel, turn the Base Station off
before disconnecting the Control Cable from the Control Panel or the Base Station.
3. Protect all cables from dirt, water entry and being dragged across the ground or other surface.
4. When re-spooling the cable take your time so as to avoid cable snags, crimps or damage to the
connectors. Re-spool evenly across the reel.
5. If the Base Station is a permanent or semi-permanent installation then simply power off and
disconnect and cap the Fiber Cable.