Telecast CH3-MPS-95VD-2ST-304, Руководство пользователя

Страница: 63 / 86

Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver System User Guide – 110124V4JH
Page 61
4. Prior to connecting the Fiber Connectors to the Base Station and Camera Unit inspect both
Connectors. If required, clean with dry compressed air or with technical wipes that have been
moistened with isopropyl alcohol. Fingerprints or other dirt on the optical connector end surfaces
will reduce the optical signal level on the fiber. If the connectors have been properly capped during
storage and movement you will not likely have a problem. However if a connector has been dropped
or dragged through dirt or exposed to dust cleaning is recommended.
5. Once the Fiber Cable has been connected it is time to secure the Fiber Cable run. Make sure there
are no cable hazards in the run. Secure the cable with Cable Guards and/or Gaffers tape to insure
safety.
6. Now the system can be powered on. Plugging in Fiber Cable connectors with the power on will not
damage the system but is not recommended because of the chance of possible eye damage.
7. When re-spooling the Fiber Cable on to the spool guide it across the entire width of the spool so that
it winds evenly and the possibility of cinching or kinks is greatly reduced.