Telecast CH3-MPS-95VD-2ST-304, Руководство пользователя

Страница: 62 / 86

Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver System User Guide – 110124V4JH
Page 60
Running the Fiber Cable
Do the following when running your Fiber Cable:
1. Make sure that both ends of the Fiber Cable are securely capped. In this case the concern is dirt and
damage. ANY dirt in the connector can adversely affect Fiber Optical performance and potentially
cause you to lose the use of your camera while the problem is diagnosed and remedied.
2. If the cable run is long or if you will lose sight of the spooling out cable reel make sure you have
appropriate assistance in running out the cable. When retrieving the cable, assistance to prevent the
cable end from being caught or tangled up could be critical. Don’t start reeling in the cable on your
own and assume the Connector end will make it back to home base safely.
3. When unspooling the cable ALWAYS make sure the stationary end (the end that goes to the Base
Station or Power Supply) us securely contained within the reel. A loose Connector can bang around
and be damaged and NEVER connect the stationary end of the Fiber Cable to the Base Station or
Power Supply and the start unspooling the Fiber Cable. Server damage to the cable could occur due
to extreme spiraling of the connected portion of the cable.
Place the stationary cable
connector inside the
center of the reel prior to
unspooling the cable