Telecast CH3-MPS-95VD-2ST-304, Руководство пользователя

Страница: 22 / 86

Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver Sys
Verification of All Components
The following items are required for
A) The CopperHead KA-F790 Camera Unit
B) The Camera Unit Mounting Plate
C) The Connector Adaptor Plate
D) Screw Assortment
a. 2 Connector Adaptor Plate Screws (with lockwashers)
b. 6 Mounting Plate to Camera Screws (black Phillips Head)
c. 4 Camera Unit to Mounting Plate Screws (plated Phillips head)
d. Note: The screws used to mount the Battery Adaptor to the Camera will be re
mount the Battery Adaptor to the Mounting Plate
E) Optional Power Wafer Unit
Insure that all of these items are present before beginn
CopperHead FS790 ProHD Transceiver System User Guide
Page 20
Verification of All Components
The following items are required for the installation procedure:
F790 Camera Unit
The Camera Unit Mounting Plate
The Connector Adaptor Plate
2 Connector Adaptor Plate Screws (with lockwashers)
Mounting Plate to Camera Screws (black Phillips Head)
Unit to Mounting Plate Screws (plated Phillips head)
Note: The screws used to mount the Battery Adaptor to the Camera will be re
mount the Battery Adaptor to the Mounting Plate
Optional Power Wafer Unit – for Powered Systems only
f these items are present before beginning the installation procedure.
The Camera described in this section is
HM790U equipped with the Anton
mount. The GY-HM790E is equipped with the
IDX “V-Mount” Battery mount.
tem User Guide – 110124V4JH
Note: The screws used to mount the Battery Adaptor to the Camera will be re-used to
ing the installation procedure.
The Camera described in this section is the GY-
equipped with the Anton Bauer battery
HM790E is equipped with the
Mount” Battery mount.