Telecast CH3-MPS-95VD-2ST-304, Руководство пользователя

Страница: 37 / 86

Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver Sys
4.2.CopperHead FS-790
The CopperHead FS-790 Base Station is available with a number of options. The unit is ordered with a
specified Power Module, Audio/Intercom Module and Fiber Connector.
location please see the overall diagrams
CopperH
Figure 14
A) Optical Connector
this Page (Front mounted O
B) Audio Indicators
See Page 36
C) Video/Data Indicators
See Page 36
CopperHead RM-FP790
Area A – Front Panel Optical Connector (Optional)
Two types of Fiber Connectors are available for use with the
One of these Fiber Connectors is pre
OpticalCON
Blank Panel
CopperHead FS790 ProHD Transceiver System User Guide
Page 35
790 Base Station
Base Station is available with a number of options. The unit is ordered with a
specified Power Module, Audio/Intercom Module and Fiber Connector. For an overall view of component
location please see the overall diagrams in Appendix 4.
CopperHead FS-790 Base Station Front Panel
14 - CopperHead FS-790 Base Station Front Panel
See
Front mounted Optional)
D) Signal Strength Indicators/Setup
See Page 37
E) Status/Power Indicators
See Page 37
790 Base Station Front Panel – Identifying Controls
Connectors
Front Panel Optical Connector (Optional)
Area A of the CopperHead RM-FP790 Base Station provides
for the optional mounting of the Fiber Optical Connector on
the front of the Base Station instead of the rear of the Base
Station.
For information on how to convert the Base Station from Rear
to Front Fiber Connector see Page 27.
types of Fiber Connectors are available for use with the CopperHead RM-FP
ne of these Fiber Connectors is pre-configured at the time of delivery.
OpticalCON SMPTE 304M
Figure 15 - Fiber Connector Types
tem User Guide – 110124V4JH
Base Station is available with a number of options. The unit is ordered with a
For an overall view of component
Signal Strength Indicators/Setup
Identifying Controls &
Base Station provides
for the optional mounting of the Fiber Optical Connector on
the front of the Base Station instead of the rear of the Base
on how to convert the Base Station from Rear
FP790 Base Station.