Telecast CH3-MPS-95VD-2ST-304, Руководство пользователя

Страница: 27 / 86

Telecast Fiber Systems – CopperHead FS790 ProHD Transceiver Sys
Mounting Of the
Operational Test
When the Camera Unit has been successfully installed perform an Operational Test of the system to
insure that all connections were made properly. Follow
Chapters 5 & 6 of this user guide.
CopperHead FS790 ProHD Transceiver System User Guide
Page 25
the Camera Unit On To the Mounting Plate
1) Carefully position the various
Camera Unit so that they “float” between the
Mounting Plate and the Camera Unit
sure that they will not be pinched when the
Camera Unit is attached to the Plate
2) Locate the Camera Unit so that the Camera
Mounting Plate is seated within the interior of
the Camera Unit – you may want to insure tha
the Camera is stable and stationary during this
process
1) When the Camera Unit is securely positioned on
the Mounting Plate and all wires are securely
contained within the Camera Unit secure the
Camera Unit using the six provided black flat
head screws
2) Install all six screws loosely before tightening
them down
Operational Test Of The Installed System
When the Camera Unit has been successfully installed perform an Operational Test of the system to
insure that all connections were made properly. Follow the setup and operating procedures described in
tem User Guide – 110124V4JH
Mounting Plate
various wires within the
Camera Unit so that they “float” between the
ounting Plate and the Camera Unit – make
sure that they will not be pinched when the
to the Plate
Locate the Camera Unit so that the Camera
Mounting Plate is seated within the interior of
you may want to insure that
the Camera is stable and stationary during this
When the Camera Unit is securely positioned on
the Mounting Plate and all wires are securely
contained within the Camera Unit secure the
Camera Unit using the six provided black flat
Install all six screws loosely before tightening
When the Camera Unit has been successfully installed perform an Operational Test of the system to
operating procedures described in