TEL AFA4000/E, Инструкция по установке и эксплуатации

Страница: 37 / 210

AFA4000/E VAV Airflow Controller / p.37
4.2 Auto Sash control options
To open / close the fume hood sash the Auto Sash Controller is fitted with:
•
A Tiptronic open/close control via the Sash Position Sensor.
•
A Sash Low micro-switch
•
A Sash Low proximity switch
4.2.1 Auto Sash Controller with Tiptronic open / close control
Tiptronic Open / Close control is the default control setup. It functions via a Sash Position Sensor
(sprung potentiometer) with a draw wire (1.2m long) attached to either the sash or the
counterweight. The Auto Sash Controller can then be calibrated to give three methods of
operation:
Method A - Close only
•
The bottom position is calibrated.
•
The sash automatically drives to the bottom position,
when the user is not present.
•
Press the
↓
pushbutton to drive the sash to the bottom
position, when the user is present.
•
The
↑
pushbutton is disabled.
Method B - 2 Positions
•
The bottom and mid-positions are calibrated.
•
The sash automatically drives to the bottom position,
when the user is not present.
•
Press the
↓
pushbutton to drive the sash to the bottom
position, when the user is present.
•
Press the
↑
pushbutton to drive the sash to the mid-
position, when the user is present.
•
When the Tiptronic feature is enabled, manually tip the
sash upwards and the sash will drive to the mid-position.
•
Manually tip the sash downwards and the sash will drive
to the bottom position.
•
When the Auto Open feature is enabled, the sash
automatically drives to the mid-position when the user is
present.
•
There is a time delay following user detection.