TEL AFA4000/E, Инструкция по установке и эксплуатации

Страница: 122 / 210

AFA4000/E VAV Airflow Controller / p.122
Menu item Option Instructions
Sash Warning
Timer (cont.) Sash warn rpt time If the alarm is enabled, set the repeat time.
Factory Settings Enter password Use
↑
/
↓
to enter password, then press
Mute.
Restore factory setting
Press Mute to restore the factory settings.
Press
↓
to return to the Monitor config
menu (section 8.1.1).
Done Return to Monitor set up
menu.
8.1.1.1 Cal config menu
Note: Use
↑
/
↓
to increase or decrease parameter values, then press Mute to save the new
value.
Menu item Instructions
Display Units Select the required display units:
•
m/sec
•
fpm
Low Air Alarm Set the low air flow alarm threshold.
Low Air Cutoff Enable or disable the low air cut-off.
If enabled, set the low air flow threshold.
High Air Cutoff Enable or disable the high air cut-off.
If enabled, set the high air flow threshold.
Warning Air Set the air flow warning threshold.
Warning Air Reset Set the air flow warning reset level.
High Air Alarm Enable or disable the high air alarm.
If enabled, set the high air flow threshold.
Lower Air Fluctuation Set the lower air fluctuation level (%).
Higher Air Fluctuation Set the higher air fluctuation level (%).
Low/High Air Difference Set the low / high air difference value.