TEL AFA4000/E, Инструкция по установке и эксплуатации

Страница: 179 / 210

AFA4000/E VAV Airflow Controller / p.179
9. Enter the required ID and press Mute .
10. Select Baud rate , then press Mute.
11. Select the required rate and press Mute .
12. Select Parity , then press Mute.
13. Select the required parity and press Mute .
14. Select Done , then press Mute.
10.2.3 BACnet settings
To setup the AFA4 000’s BACnet settings:
1. From the Requires set up screen, press Mute , or from the Run Screen press and hold the
Mute button for 5 seconds until the Main Menu is displayed.
2. Select Set Up Monitor > Configure .
3. Enter the password (the factory default password is 0-0-0-0) and press Mute to continue.
4. Select Protocol , then press Mute .
5. Select BACnet , then press Mute .
6. Select BACnet Settings and press Mute.
7. The following parameters will be shown in a sub-menu:
Parameter Description Range Default
A Device
Instance
Set the Slave ID for the
unit 0000000 to 4194303 0000000
B Station ID Set the network ID 0-127 1
C Baud rate Set the required Baud
Rate
•
1200
•
9600
•
38400
•
2400
•
14400
•
57600
•
4800
•
19200
38400
D Parity Set the required Parity Non/ Even/ Odd None
E Max Masters Set the max masters
(max devices on the
network) 0-127 1
8. Select Device Instance , then press Mute .
9. Enter the required instance and press Mute .
10. Select Station ID , then press Mute. Enter the required ID and press Mute .
11. Select Baud rate , then press Mute.
12. Select the required rate and press Mute .
13. Select Parity , then press Mute.