Tektronix TLA7AA1, Руководство пользователя, Страница: 51 / 173

Operating Information
2- 8
TLA7AXX Logic Analyzer Module Service Manual
Use the following steps to remove the performance verification software from
the hard disk in the mainframe. These steps are necessary when you want to
upgrade the performance verification software.
1.
On the desktop, select Start
→
Settings
→
Control Panel
2. Double-click on Add/Remove Programs.
3. Select TLA7AxxPVAdjust.
4. Click the Change/Remove button.
Operating Information
This section provides a high-level overview of the controls and connectors of the
logic analyzer module. It provides a high-level overview of the logic analyzer
user interface and software.
Figure 2--5 shows the connectors and indicators on the front panel of a 136-chan-
nel logic analyzer module. Modules with fewer channels look and operate the
same, but without the additional probe connectors.
Injector/Ejector Handles.
The injector/ejector tabs are used to seat and unseat the
modules in the mainframe.
READY Indicator.
The READY indicator lights continuously after the logic
analyzer module successfully completes the power-on process. If the indicator
fails to light within five seconds of power-on, an internal module failure may be
present.
ACCESSED Indicator.
The ACCESSED indicator lights anytime the controller
accesses the logic analyzer module.
ARM’D Indicator. The ARM’D indicator lights when the logic analyzer module is
armed during an acquisition.
TRIG’D Indicator. The TRIG’D indicator lights when the logic analyzer module
triggers and stays on until the module finishes acquiring data.
Removing the Software
Front Panel