manualshive.com logo in svg

Tektronix Phaser 600, Руководство по обслуживанию

Поделиться
Скачать
Tektronix Phaser 600 Скачать руководство пользователя страница 53

2-36

Phaser 600 Color Printer

2

Installing the Printer and Drivers

14.

If your printer is set up correctly, and you clicked Yes in Step 12, a test 
page prints showing the Windows 95 logo and information on your 
printer.    

Your Phaser 600 printer is added to the Printers window.

Setting up the Adobe PostScript driver for Windows 95

Note

The files for this driver are available only on the printer’s CD-ROM.  
If you already have the driver installed and you are only adding a 
printer, such as the Phaser 600 printer, open the Control Panel, 
double-click the Adobe driver icon, then continue with Step 7.

1.

Insert the printer’s CD-ROM into your CD-ROM drive. 

 

2.

Click the Start icon in the taskbar on your screen.  In the menu that 
appears, click Run.

3.

In the Run window, type in the drive the CD-ROM is in, followed by 
the \ADOBEPS4 directory and the file name SETUP.EXE and click 
OK

.  For example:

C:\ADOBEPS4\SETUP 

4.

When the AdobePS4 PostScript Printer Driver Setup dialog box 
appears, click the Read button if you wish to see a text file with driver 
instructions.  Click Next to continue, or Exit to quit.

5.

In the Install Setup Program dialog box, decide if you want to copy 
the Adobe driver setup program to your hard disk, then click Next.

If you selected Yes, continue with the on-screen instructions.

6.

In the Printer Type dialog box, select your printer’s connection:

■

Select Local Printer if your printer is connected directly to your 
computer, then click Next.

■

Select Network Printer if you are accessing your printer through a 
network.  Click Browse to search the network and select a printer 
queue.  Then click Next.

Содержание Phaser 600































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды