Tektronix Phaser 600, Руководство по обслуживанию

Страница: 110 / 286

5-16
Phaser 600 Color Printer
5
Theory of Operation
Fusing and cutting
As the print advances far enough, the stripper fingers force the leading edge of
the paper off the drum and into the fuser. As the media passes through the fuser,
the fuser shuttle in driven back-and forth across the print. With roll-red media,
as the fusing completes, the fuser shuttle is driven to the extreme right of its
travel, this raises the fuser shuttle’s cutting blade. Then the fuser shuttle is
driven to the left, cutting the print from the roll. As the fuser shuttle reaches the
left end of its travel the cutting blade is lowered. The exit motor energizes to
pull the print out of the printer. The Y-motor reverse to draw the paper
remaining in the paper path back to the start position at the upper feed rollers.
Figure 5-10 Fusing the print
9482-106
Stripper fingers
Exit
rollers
Exit sensor Fuser shuttle