Tektronix Phaser 600, Руководство по обслуживанию

Страница: 47 / 286

2-30
Phaser 600 Color Printer
2
Installing the Printer and Drivers
AppSocket
receive window
size The buffer size on the printer in which
to receive data. The actual window
size is established when the
connection is made and may be
smaller to accommodate the host. yes 0 1024 through 59392
AppSocket
send window
size The buffer size on the printer in which
to send data. The actual window size
is established when the connection is
made and may be smaller to
accommodate the host. yes 0 1024 through 59392
Syslog Protocol that acts as a remote front
panel to the printer. yes Not Authorized, <null string>
Log Hosts Address list of hosts that want to
receive syslog messages. yes Send no
messages List of IP addresses in the
format N.N.N.N
Log Priority The threshold indicating the priority
level of messages from the printer that
will be sent to the list of log host(s). yes 5 0 – unit is no longer usable,
1 – messages indicating
action is needed on part
of system admin,
2 – critical error messages,
3 – error message,
4 – warning messages,
5 – normal but significant
message,
6 – informational messages,
7 – debugging messages
SNMP Allow the printer to respond to status
queries from host-resident Simple
Network Management Protocol
(SNMP) utilities. yes Not Authorized, <null string>
System name Printer name yes Phaser 600 String of 0 to 255 characters
System contact Name and phone number or address
of person responsible for the printer. yes String of 0 to 255 characters
System location Location of the printer. yes String of 0 to 255 characters
Trap Hosts A list of hosts, one for each protocol,
which are able to receive traps. yes None None,
N.N.N.N/Public,
N.N.N.N/Proxy,
N.N.N.N/Private,
N.N.N.N/Regional,
N.N.N.N/Core
Private Hosts A single node address per protocol of
a host which is able to set SNMP
variables. yes None List of IP addresses of the
form
N.N.N.N
Authentication
Failure Traps If enabled, the printer sends a trap for
SNMP authentication failure. yes Enabled Disabled
SCSI Disk Indicates if a SCSI disk is attached to
the printer. Also indicates its storage
capacity and the amount of free space. no Internal
Connected,
External On-line, total space, free
space. Uninitialized.
Table 2-1 Configuration page settings (cont'd.)
Parameter Description Saved
in
NVRAM
Default Limits or alternate choices