Tektronix Phaser 600 страница 156 Скачать руководство пользователя

Страница: 156 / 286

7-4

Phaser 600 Color Printer

Cleaning and Maintenance

Insert the cloth into the cleaning tool:

■

If the cloth has not been folded, fold it in half; insert the folded edge of
the cloth into the “V” opening of the cleaning tool.

Pull forward on the back tension blade’s blue handle and hold it in
that position; this lifts the blade away from the drum.

“Hook” the tool under the blade; it notches onto the rail to serve as a
guide, cleaning the front and back of the blade at the same time.

Clean one section of the blade by wiping back and forth 3-4 times with
pressure.

Switch hands to clean the other end of the blade.

9480-14

9480-19

Содержание Phaser 600































































































































































































































































































Результаты поиска

Содержание Phaser 600

Отзывы:

Похожие инструкции для Phaser 600

Бренды по названию

Популярные бренды

Tektronix Phaser 600, Руководство по обслуживанию

Результаты поиска

Содержание Phaser 600

Отзывы:

Похожие инструкции для Phaser 600

Бренды по названию

Популярные бренды