TECNA TE700, Инструкция по эксплуатации

Страница: 39 / 128

TECNA
S.p.A.
ITEM TE700 Instruction Manual
39/128
THICK. MIN 00.00 – 60.00 mm
THICK MAX 00.00 – 60.00 MM
QUALITY –T * IDENT
IDENT. MIN 0.000 – 6.000 mm
IDENT. MAX 0.000 – 6.000 mm
QUALITY –T * TH+ID
THICK. MIN 00.00 – 60.00 mm
THICK MAX 00.00 – 60.00 MM
IDENT. MIN 0.000 – 6.000 mm
IDENT. MAX 0.000 – 6.000 mm
QUALITY –T * ZERO
QUALITY –R * PRE
RMIN PRE 0 – 60000uOhm
RMAX PRE 0 – 60000uOhm
QUALITY –R * POST
RMIN POST 0 – 60000uOhm
RMAX POST 0 – 60000uOhm
QUALITY –R * PRE+POST
RMIN PRE 0 – 60000uOhm
RMAX PRE 0 – 60000uOhm
RMIN POST 0 – 60000uOhm
RMAX POST 0 – 60000uOhm
QUALITY –R * ZERO
There are some special conditions:

On setting the OFF TIME to zero, the control unit will work in single cycle.

On setting the PRE-WELD parameter to zero, the pre-welding process will not be carried
out.

On setting the POST-WELD parameter to zero, the post-welding process will not be
carried out.

On setting WELD 2 parameter to zero, WELD 2 will not be carried out.

On setting LIM I MIN and LIM I MAX to the same value, the limits are deactivated.

On setting LIM RO MIN and LIM RO MAX to the same value, the limits are deactivated.

On setting LIM V MIN and LIM V MAX to the same value, the limits are deactivated.

On setting LIM P MIN and LIM P MAX to the same value, the limits are deactivated.

On setting LIM E MIN and LIM E MAX to the same value, the limits are deactivated.

On setting THICK. MIN and THICK. MAX to the same value, the limits are deactivated.

On setting IDENT. MIN and IDENT. MAX to the same value, the limits are deactivated.

On setting RMIN PRE and RMAX PRE to the same value, the limits are deactivated

On setting RMIN POST and RMAX POST to the same value, the limits are deactivated