TECNA
S.p.A.
ITEM
TE700 Instruction
Manual
2.1 –
PROGRAM DATA
-TE700 VER. 1.09--
>PROGRAM DATA
SETUP MENU
STEPPER MENU
The
PROGRAM DATA
menu contains all the weld cycle parameters, the times and the
currents which to carry out the welds with.
PROGRAM DATA T1
>PROGRAM N. 001
PRG. NAME
TOOLS N° 1
The first choice to make is the number of the program to be used. Choose among the 300
storable programs using the and keys.
After having selected the program number which to work with, use key to enter an
alphanumeric identifier associated with the number of the program so that it is easier to
recognize it during the recall or the display.
PROGRAM DATA T1
PROGRAM N. 001
>PRG. NAME USI1500P
TOOLS N° 1
Press key
to select which character is to be entered or modified. Each time key
is
pressed, the next character in the string is selected beginning from position 1 up to position
number 8. On reaching the eighth character, when key is pressed the operator may modify
the first character again.
PROGRAM DATA T1
PROGRAM N. 001
>PRG. NAME U<SI1500P
TOOLS N° 1
The affected character is indicated on the control unit display by the symbol "<" located on the
right-hand side of the character itself. In order to change the character, use keys
and
and
key [///]. The usable characters are the decimal numbers from 0 to 9, the space key and
the capital characters of the international alphabet from A to Z.
After having changed the name of the program to work with, use key to select the weld tool
number.
PROGRAM DATA T1
PROGRAM N. 001
PRG. NAME USI1500P
>TOOLS N° 1
The values of the parameter may range from 1 up to 4 at the most. The max value is set
inside the
FEATURES INVERTER
menu and is included between 1 and 4 (N.WELDING
21/128
