Taiden hcs-8300 Скачать руководство пользователя страница 90

Страница: 90 / 255

3.4.3 Connection

3.4.3.1 Connecting to the CMU or the EMU

The HCS-8336 SDI monitor is equipped with a

1.5-meter 6P-DIN cable with a standard male

connector. To connect to the HCS-8300 CMU or the

HCS-8300 EMU, just connect the male connector of

the first unit to the output of the main unit.

If there is a long distance between the HCS-8336 and

the CMU (EMU), CBL6PS extension cable can be used.

One end is equipped with a 6P-DIN male connector

and the opposite end with a female connector. Just

connect the female connector of the cable to the next

congress unit, and connect the male connector to the

output of the main unit.

Figure 3.4.3 HCS-8336 SDI monitor connected to the

CMU/EMU

Neither the replacement of HCS-8336 nor cable faults

between HCS-8336 will affect the other units if “Closed

Loop - Daisy Chain” connection topology is selected.

“Closed Loop - Daisy Chain” connection, achieved by

closing the loop of the daisy-chained units, increases

system reliability. To obtain “Closed Loop - Daisy

Chain” connection, just connect the last HCS-8336

back to the CMU or the EMU with a CBL6PP extension

cable (the cable features a 6P-DIN male connector at

each end). In HCS-8300 series system, the congress

main unit can realize a “Closed Loop - Daisy Chain”

connection, but only one – extension units do not offer

this feature.

Figure 3.4.4 “Closed Loop - Daisy Chain” connection

between the CMU and HCS-8336 SDI monitor

3.4.3.2 Connection between congress units

The HCS-8336 SDI monitor are daisy-chained easily

and conveniently by dedicated 6P-DIN cables.

When connecting to another HCS-8336, just connect

the 6P-DIN standard female connector on the

0.6-meter cable of the unit to the 6P-DIN standard male

connector on the1.5-meter cable of the next unit.

Figure 3.4.5 “Daisy-chain” connection between

HCS-8336 SDI monitor

3.4.3.3 Video display

HCS-8336 SDI monitor is equipped with a 10” TFT

LCD with 1280

800 high-resolution. It supports high

definition digital video (SDI) display corresponding with

the standard CEA-861. Video signal transmitted on a

high quality coaxial-cable, such as RG-6 or SYV-75

and the length of each cable is no more than 50 m.

Содержание hcs-8300
































































































































































































































































Результаты поиска

Содержание hcs-8300

Отзывы:

Похожие инструкции для hcs-8300

Бренды по названию

Популярные бренды

Taiden hcs-8300, Инструкция по установке и эксплуатации

Результаты поиска

Содержание hcs-8300

Отзывы:

Похожие инструкции для hcs-8300

Бренды по названию

Популярные бренды