Taiden hcs-8300, Инструкция по установке и эксплуатации

Страница: 106 / 255

93

Finger Print and PIN Code Sign-in
In finger print and PIN code sign-in status, the LCD will
display as in the following figure:
Either finger print sign-in or PIN code sign-in will work.

Finger Print and Seat IC Card Sign-in
In finger print and seat IC card sign-in status, the LCD
will display as in the following figure:
Either finger print sign-in or IC card sign-in will work.
In above sign-in mode, after sign-in, the main interface
displayed as the following figure. The icon “ ” is used
for locking LCD screen to protect the meeting
information in case the delegates leave for a short time.
Paperless multimedia terminals will work on after
delegates sign in again (The DCS server cannot stop
sign-in).
After sign-in, sign-in result will be displayed as in the
following figure:
B. Voting
Chairman unit can start 3 keys voting, application
software can start 2 keys, 3 keys, 4 keys or 5 keys
voting. Supports multi-proposal voting.

Voting

Connect to PC
，
proposal and voting option will be
displayed on LCD, click on voting buttons and
voting. For three keys voting, you can vote by
pressing virtual keys on the screen or pressing
keys on the front-right panel (set by DCS software:
Setup – System Parameters - -Topic and Voting --
Voting key);

For “First key-press mode” proposal, delegate can
click voting buttons only once;

For “Last key-press mode” proposal, delegate can
change his/her voting, and the last clicked voting
button will be counted;

Without PC, the voting originated by the chairman
unit only supports “Last key-press mode”;