Taiden hcs-8300, Инструкция по установке и эксплуатации

Страница: 141 / 255

128
4.2.3.2 LCD configuration menu
When the “Interpretation setup” has been configured in
the CMU, and then the interpreter unit must be
configured:

If the interpreter unit has not been configured,
the LCD will display “UNIT NOT INSTALLED”;

If the interpreter unit has been configured, the
LCD will display the standby interface.
Icon on LCD:
Icon Indicating
Headset inserted
Headphone inserted
Booth:05
Bluetooth: On
Booth:05
Bluetooth: Connected
Message received
Audio feedback: On
REP:8s Repeat function and repeat
time
00:00:05 Speech time
05:ENG
Loudspeaker channel
2016-01-21 09:00 System current time
06
Output channel engaged
Call operator
1099
Quantity of listeners
●
REC Audio stream is in use
Monitor channel is muted
Output channel is muted
A
）
Accessing menu
In the menu operation of the interpreter unit:

If unit not installed, press the function knob to
enter the setting menu;

Under the standby interface, press the
“Home” button to enter the LCD menu.
In the following operation:

Turn the function knob to select LCD menu or adjust
parameters value;

Press the function knob to confirm/go to submenu;

Press the “Home” button to return/exit.
B
）
Menu configuration
The LCD menu includes:
Brightness Bluetooth
Setting Help About
Brightness
Turn the Function knob to adjust screen brightness,
then press the Function knob to confirm or press the
“Home” button to return.
Bluetooth
Turn the Function knob to select among On, Off or App,
the selected item becomes highlighted, then press the
Function knob to confirm or press the “Home” button to
return. The default Bluetooth status is Off , If Bluetooth
is On but cannot connect after 3 minutes, it will be off
automatically.
If you select App, press the Function button to open QR
code interface, scan the QR code according to you
phone or pad to download Taiden SI tool App. After