Taiden hcs-8300 Скачать руководство пользователя страница 145

Страница: 145 / 255

132

4.2.4.2 Operation of speaking area

The speaking area, on the right side of the unit, is the

area which is used to distribute the interpretation

languages to the corresponding channels. It includes

functional buttons and channel selectors, etc.

1. Press the microphone ON/OFF button, and distribute

the interpretation language to the output channel.

At most 6 interpreter units can be set in one booth for

6 interpreters. Only one microphone can be activated

in one booth. When one microphone in the booth is

activated, the loudspeaker of every interpreter unit in

the booth will mute.

2. Output channel select:



Use the “A”, “B” or “C” button to switch the output

channel quickly. If the auto relay interpretation is

activated and the output channel B/C activated,

the output will be automatically distributed to all

booths which set this booth as their auto relay

booth and other interpreters can now do relay

interpretation.



Both the “A”, “B” and “C” buttons have an

ENGAGED indicating light each. If the selected

output channel is already engaged by another

interpreter unit, this indicating light will be

activated.

3. Press and hold the “MUTE” button to close the

microphone temporarily and the Mute indicating light

will be turned on. Releasing the button will activate

the microphone automatically.

4. The “MESSAGE”

（

) button is used to check short

message.

5. Intercom button: if output channel C is “No Output”,

and If selected “Allow Call” by application software

(Control – Booth Manage. – Param. Setup), press

and hold C button to call the operator (PTT mode).

6. “HELP” button: If selected “Allow Help” by

application software (Control – Booth Manage. –

Param. Setup), used by the interpreter requesting

for

help. Help information will be displayed on the status

bar of the application software; at the same time,

“Booth: xx asks for help” will be displayed on the

LCD of operator unit.

8. Beeps

The audio beeps can be toggled on and off with the

Beep button. If this function is enabled, the display

shows a musical note, the audio beeps can also be

toggled on and off with the Mic. ON/OFF button. When

beeps are enabled, the interpreter unit plays a beep

when the channel that you selected contains an

indirect interpretation of the floor language.

Содержание hcs-8300
































































































































































































































































Результаты поиска

Содержание hcs-8300

Отзывы:

Бренды по названию

Популярные бренды

Taiden hcs-8300, Инструкция по установке и эксплуатации

Результаты поиска

Содержание hcs-8300

Отзывы:

Бренды по названию

Популярные бренды