Taiden hcs-8300, Инструкция по установке и эксплуатации

Страница: 190 / 255

177

If connect one HCS-8300MX/FS: the conference
room function should be set as “ All Function ”;

If connect two HCS-8300MX/FS: they must have
the same conference Room ID, and one of the
conference room function should be set as “ All
Function ”, the other as “ Only Landlord ”;
d). Press the “MENU” button to save and return to the
upper level menu.
6.4.3.4 Booth state
Displays the quantity of lent booths of the current room.

In tenant mode, displays the quantity of lent
booths;

In slave mode, lend all booths;

In other modes, no booth was lent.
6.4.3.5 Work state
Displays the port status of the HCS-8300MX/FS

The room number each port is linked to;

Ports are used or not.
6.4.3.6 Set operation language
Setup operation language. Currently, simplified
Chinese, traditional Chinese and English are supported.
Other languages can be added by the user through the
LCD_Designer tools.
Operation step:
a). Press the “

/

” button to switch between the
languages;
b). Press the “MENU” button to save and return to the
upper level menu.
6.4.3.7 Network setting
“Network” includes three submenus:

“IP address”

“Subnet mask”

“Gateway”
a) Setup unique “IP Address” for the Booth
Combiner
1). Select “IP address” and press the “Menu” button
to go to setup the IP address interface:
2). Use the “

/

” button to switch between the four
numbers;
3). Use the “MENU” button to edit the selected
number;
4). Use the “

/

” button to decrease/increase the
number(press and hold the “

/

” button will
adjust numeric value quickly);
5). Use the “EXIT” to return to the upper level menu.
U
b) Setup “Subnet Mask” and “Gateway”
Same chronological order as for “IP address” set up.