Taiden hcs-8300, Инструкция по установке и эксплуатации

Страница: 42 / 255

29
If ALL is selected for C then
3
rd
step : select a language for B. Three channels are
now available: A and B output a selected language and
C outputs any available language.
If NONE is selected for C then
4
th
step: select B: NONE or ALL
If NONE is selected for B only A outputs the selected
language of step 1. B and C do not output languages
If ALL is selected for B then 2 output channels are
available : A outputs the selected language of step 1
and B outputs any available language. No language
output at C
1). Setup channel A language for booth 1: press the
“

/

” button to select language from those
languages that have been selected in step b)
and press the “MENU” button to confirm;
2) . Select channel C language for booth 1: “NONE”
or “ALL”;
3). If ALL is selected for C then
press the “

/

” button to select language for B
from those languages that have been selected in
step b) and press the “MENU” button to confirm;
4). If NONE is selected for C then select channel B
language from “NONE” or “ALL”;

“NONE” stands for no language output from
channel B;

“ALL” stands for the language of channel B
which can be any of the selected languages.
Press the “MENU” button to confirm and go to
configuration for next booth;
5) . Repeat 1) - 2) to setup output channel A/B/C
language for all booths and go to step g).
g). Auto-Relay booth Setting
Setup Auto-Relay booth.
1) . Press the “

/

” button to select yes or no

If select “ No ”, press the menu button to
confirm;

If select “ Yes ”, press the “MENU” button to
confirm and go to next step;
2) . Press the “

/

” button to select auto-relay booth
quantity and press the “MENU” button to go to the
next step;
3) . Press the “

/

” button to select auto-relay booth
and press the “MENU” button to confirm, then the
corresponding booth number will be highlighted
and set as auto-relay booth. Press the “

/

”
button to select next auto-relay booth until all
auto-relay booths have been set;
4). Repeat step 2) and 3) to setup auto-relay for all
other booths.
2.1.4.3 System status
“System status” submenu includes:
“Unit Status”
“Interpretation Status”
Note:

If channel B and C of a booth have no output,
this booth can not be set as auto-relay booth.