background image

November, 1999

6880906Z38-O

-1

MOTOROLA
Telario Installation Manual

Introduction

Congratulations! You have chosen the Motorola Telario™ Integrated Cordless
Telephone and Two-Way Radio System. The Telario System is a state of the art
Motorola digital communications system. This product family of 1.9 GHz unli-
censed wireless communication equipment is intended for businesses with
groups of in-building users. The system supports two types of handsets and
utilizes TDMA Control Stations that allow integrated voice services to several
communications groups. With Motorola’s seamless integration of two-way
dispatch services – Group Talk and Private Link, and Full Duplex (toll quality)
Cordless Telephone capability – your customer will experience an efficient and
productive work environment.

Regulatory Approvals

FCC

The TS3000 Telario Control Station complies with Part 15 and 68, FCC rules.
FCC Registration Number: ABZ99FT7012
Ringer Equivalence Number:

This equipment complies with Part 15 and 68 of the FCC Rules. On the bottom
of the TS3000 Control Station are labels that contain, among other information,
the FCC Registration Number and Ringer Equivalence Number (REN) for this
equipment. If requested, this information must be given to the telephone com-
pany.

The REN is useful to determine the quantity of devices you many connect to
your telephone line and still have all of those devices ring when your number
is called. In most, but not all, areas, the sum of the RENs of all devices con-
nected to one line should not exceed five (5.0). To be certain of the number of
devices you many connect to your line, as determined by the REN, you should
contact your local telephone company to determine the maximum REN for
your calling area.

If your telephone equipment causes harm to the telephone network, the tele-
phone service may discontinue your service temporarily. If possible they will
notify you in advance. But if advance notice isn’t practical, you will be notified
as soon as possible. You will be informed of your right to file a complaint with
the FCC.

Your telephone company may make changes in its facilities, equipment, oper-
ations or procedures that could affect the proper functioning of your equip-
ment. If they do, you will be notified in advance to give you an opportunity to
maintain uninterrupted telephone service.

If you experience trouble with this equipment, please contact your authorized
Motorola dealer for information on obtaining service or repairs. The telephone
company may ask that you disconnect this equipment from the network until
the problem has been corrected or until you are sure the equipment is not mal-
functioning.

This equipment has been tested and found to comply with the limits for Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and

Содержание Telario TS3000



















Отзывы: