Taiden HCS-4100/50 Series, Инструкция по установке и эксплуатации

Страница: 72 / 223

59
Active microphone number limitation (1/2/3/4)
reached :
All other microphones cannot be activated unless
one of the active microphones is turned off.
D. “Apply” mode
a. Press the microphone On/Off key to request to
speak, the chairman unit can approve or reject
his/her request;
b. When his/her request is approved, the microphone
is activated, he/she can speak. In stand-alone
mode, only one delegate is enabled to request; in
combination with application software, the request
amount can be set via the application software;
c. When the active microphone number limitation is
reached, none other delegate can request unless
one of the active microphones is switched off.
E. “PTT” mode
Active microphone number limitation (1/2/3/4) NOT
reached:
a. The microphone will be activated when the
microphone On/Off key is pressed, the speaker
can give his/her speech;
b. The microphone will be deactivated when the
microphone On/Off key is pressed again.
Active microphone number limitation (1/2/3/4)
reached :
Pressing the microphone On/Off key cannot
activate the microphone until one of the activated
microphones is switched off.
Speaking mode as well as active microphone number
limitation can be configured at the main unit. The
chairman unit and the VIP unit do not count in the
active microphone number limitation. At most 6
microphones can be activated at the same time in a
system. VIP units can be assigned by application
software - at most 32 VIP units.
A camera can focus an activated microphone
automatically (camera position preset by application
software). Speaker’s video can be exported to and
displayed on large screen(s).
4. Voting
Voting can be originated by the chairman unit (only for
3 keys voting), or by HCS-4100/50 application
software.
ƒ The voting button indicating lights of the congress
unit start to blink, the delegate can press the voting
button to vote;
ƒ For “First key-press valid” voting, the delegate can
vote only once, and his/her voting indicating lights
will be deactivated and his/her voted item will be
highlighted on the LCD after his/her voting;
ƒ For “Last key-press valid” voting, the delegate can
change his/her vote. When the delegate voted, the
indicating light of his voted key will be activated
and all other indicating lights will be deactivated
and his/her voted item will be highlighted on the
LCD. About 1 second later, all indicating lights will
blink again, and the delegate may change his/her
vote. His/her last voted key will be valid;
ƒ
The voting originated by the chairman unit only
supports “Last key-press valid”.
5. Channel selection
ƒ
When the CMU is connected to interpreter unit(s),
simultaneous interpretation function will work. To
use the channel selector, an earphone must be
plugged in. When the earphone is plugged, the
LCD will display the simultaneous interpretation
channel number and language name. The
delegate can select a suitable language to listen to
by means of the channel selector.
ƒ When the earphone is pulled out, the LCD will not
display the simultaneous interpretation information
anymore, and the built-in loudspeaker will switch to
floor audio channel.
6. Volume control
ƒ The volume of the built-in loudspeaker can be
adjusted by the master volume control knob on the
main unit;
ƒ When the earphone is plugged, its volume can be
adjusted by the earphone volume control of the
unit. The built-in loudspeaker will be deactivated.