Taiden HCS-4100/50 Series, Инструкция по установке и эксплуатации

Страница: 96 / 223

83
can give his/her speech;
b. The microphone will be deactivated when the
microphone On/Off key is pressed again.
Active microphone number limitation (1/2/3/4)
reached :
Pressing the microphone On/Off key cannot
activate the microphone until one of the activated
microphones is switched off.
Speaking mode as well as active microphone number
limitation can be configured at the main unit. The
chairman unit and the VIP unit do not count in the
active microphone number limitation. At most 6
microphones can be activated at the same time in a
system. VIP units can be assigned by application
software - at most 32 VIP units.
A camera can focus an activated microphone
automatically (camera position preset by application
software). Speaker’s video can be exported to and
displayed on large screen(s).
4. Voting (HCS-4371SD/50 does not have this
function)
Voting can be originated by the chairman unit (only for
3 keys voting), or by HCS-4100/50 application
software.
ƒ The voting button indicating lights of the congress
unit start to blink, the delegate can press the voting
button to vote;
ƒ For “First key-press valid” voting, the delegate can
vote only once, and his/her voting indicating lights
will be deactivated and his/her voted item will be
highlighted on the LCD after his/her voting;
ƒ For “Last key-press valid” voting, the delegate can
change his/her vote. When the delegate voted, the
indicating light of his voted key will be activated
and all other indicating lights will be deactivated
and his/her voted item will be highlighted on the
LCD. About 1 second later, all indicating lights will
blink again, and the delegate may change his/her
vote. His/her last voted key will be valid;
ƒ The voting originated by the chairman unit only
supports “Last key-press valid”.
5. Channel selection (HCS-4371SD/50 and
HCS-4382SD/50 do not have this function)
ƒ When the CMU is connected to interpreter unit(s),
simultaneous interpretation function will work and
the channel selector will be activated. To use the
channel selector, an earphone must be plugged in.
When the earphone is plugged, the backlight of the
channel select display lights up. The delegate can
select a suitable language to listen to by means of
the channel selector;
ƒ
When the earphone is pulled out, the backlight of
the channel select display will extinguish and the
built-in loudspeaker will switch to floor audio
channel.
6. Volume control
ƒ The volume of the built-in loudspeaker can be
adjusted by the master volume control knob on the
main unit;
ƒ When the earphone is plugged, its volume can be
adjusted by the earphone volume control of the
unit. The built-in loudspeaker will be deactivated.
7. LCD display (HCS-4370SDWE/50 and
HCS-4371SD/50 do not have this function)
After initialization, the following interface will be
displayed on the LCD:
A. “Message” (key “1”)
ƒ Use this key to read a message. When a PC is
connected, the operator can edit and send a
message to congress unit(s).
ƒ On receipt of a message, a ring tone will be
emitted by the built-in loudspeaker and
“You have
got a new message”
will be displayed on its LCD
and the indicating light of key “5” will blink. Press
key “5” to read the corresponding message.
ƒ At most 4 messages can be stored in the congress
unit. In case of more incoming messages, the first
received message will be overlapped.