Taiden HCS-4100/50 Series, Инструкция по установке и эксплуатации

Страница: 27 / 223

14
23. “LINE OUT 2”
(RCAx2 unbalanced output)
24. “LINE OUT 1” (3-cord XLR balanced output)
25. “LINE IN 2” (RCAx2 unbalanced input)
26. “LINE IN 1” (3-cord XLR balanced input)
27. RS-232C port x 2
ƒ “COM” port is used for connecting to a central
control system for central controlling, as well as for
system diagnosis;
ƒ “TEST” port is used for updating and monitoring.
2.2 Installation
The CMU can be fixed in a standard 19-inch cabinet. The
CMU is equipped with a pair of fixing brackets
① . First
unscrew the lateral screws ② from the housing. Then
fasten the brackets with these screws and put the CMU
in the cabinet. Finally fix the four holes
③ up with
screws.
Figure 2.3 Installation of the CMU
In addition, 1U metal stripes are included as decoration
to be installed between the CMUs in the cabinet. It is
also good for the ventilation and cooling off. Fix up the
four holes
③ with screws.
Figure 2.4 Decoration of cabinet