
131
Active microphone number limitation (1/2/3/4)
reached
:
All other microphones cannot be activated unless
one of the active microphones is turned off.
D. “Apply” mode
a. Press the microphone On/Off key to request to
speak, the chairman unit can approve or reject
his/her request;
b. When his/her request is approved, the microphone
is activated, he/she can speak. In stand-alone
mode, only one delegate is enabled to request; in
combination with application software, the request
amount can be set via the application software;
c. When the active microphone number limitation is
reached, none other delegate can request unless
one of the active microphones is switched off.
E. “PTT” mode
Active microphone number limitation (1/2/3/4)
NOT
reached:
a. The microphone will be activated when the
microphone On/Off key is pressed, the speaker
can give his/her speech;
b. The microphone will be deactivated when the
microphone On/Off key is pressed again.
Active microphone number limitation (1/2/3/4)
reached
:
Pressing the microphone On/Off key cannot
activate the microphone until one of the activated
microphones is switched off.
Speaking mode as well as active microphone number
limitation can be configured at the main unit. The
chairman unit and the VIP unit do not count in the
active microphone number limitation. At most 6
microphones can be activated at the same time in a
system. VIP units can be assigned by application
software - at most 32 VIP units.
A camera can focus an activated microphone
automatically (camera position preset by application
software). Speaker’s video can be exported to and
displayed on large screen(s).
3. VIP unit
Any delegate unit can be assigned as a VIP unit by
the HCS-4100/50 application software. At most 32
VIP units can be assigned;
As long as the active microphone number does not
exceed 6 (including chairman/delegate/VIP), the
microphone of the VIP unit can be activated freely;
If the priority mode is configured as “All off”, all
active delegate microphones will be turned off
when the chairman presses his priority key, and all
active VIP microphones will be muted temporarily.
They will restore when the chairman releases his
priority key;
If the active microphone number reached 6, the
microphone cannot be turned on unless one of the
active microphones is deactivated.
Содержание HCS-4100/50 Series
