Taiden HCS-4100/50 Series, Инструкция по установке и эксплуатации

Страница: 137 / 223

124
again, and the delegate may change his/her vote.
His/her last voted key will be valid.
5. Channel selector
ƒ When the CMU is connected to interpreter unit(s),
simultaneous interpretation function will work and
the channel selector will be activated. To use the
channel selector, an earphone must be plugged in.
When the earphone is plugged, the backlight of the
channel select display lights up. The delegate can
select a suitable language to listen to by means of
the channel selector;
ƒ When the earphone is pulled out, the backlight of
the channel select display will extinguish and the
built-in loudspeaker will switch to floor audio
channel.
6. Volume control
ƒ When the earphone is plugged, its volume can be
adjusted by the earphone volume control of the
unit.
7. VIP unit
ƒ Any delegate unit can be assigned as a VIP unit by
the HCS-4100/50 application software. At most 32
VIP units can be assigned;
ƒ As long as the active microphone number does not
exceed 6 (including chairman/delegate/VIP), the
microphone of the VIP unit can be activated freely;
ƒ If the priority mode is configured as “All off”, all
active delegate microphones will be turned off
when the chairman presses his priority key, and all
active VIP microphones will be muted temporarily.
They will restore when the chairman releases his
priority key;
ƒ
If the active microphone number reached 6, the
microphone cannot be turned on unless one of the
active microphones is deactivated.
3.8.4.2 Chairman unit
The chairman unit features all the functions of a
delegate unit, and the following additional functions:
1. Speaking
ƒ If the number of active microphones in the system
is less than 6 (including chairman /delegate /VIP),
the chairman can activate his/her microphone
normally, the operation is the same as for the
delegate unit (refer to section 3.8.4.1);
ƒ If the number of active microphones in the system
is 6, the chairman cannot activate his/her
microphone.
2. Approve delegate unit’s request to speak
Under “Apply” mode, when a delegate requests to
speak, a ring tone will be emitted by the earphone of
the chairman’s unit.
The chairman can now approve the delegate’s request
and activate the delegate’s microphone by pressing
key “1” or reject the delegate’s request by pressing key
“5”.
Only one delegate can request to speak at one time.
3. Voting
HCS-4326C/50 chairman unit cannot originate voting
without a PC:
ƒ When controlled by application software,
nominative or ballot voting are available;
ƒ “First key-press valid” or “Last key-press valid” are
available;
ƒ Voting can be controlled by application software.
Voting operation of the chairman unit and the
delegate unit are identical. In this mode, voting can
also be controlled by the chairman unit. The “Start
voting” indicating light on the chairman unit will
blink. Voting starts once the chairman pressed the
“START” key.