Taiden HCS-4100/50 Series, Инструкция по установке и эксплуатации, Страница: 43 / 223

30
26. “Close Loop Setting”
Enable/disable ring connection.
a). Press the “ Õ / Ö ” button to select “Yes” or “No”;
ƒ If “ No ” is selected, only “Daisy Chain”
connection can be used;
ƒ If “ Yes ” is selected, “Closed Loop” connection or
“Daisy Chain” connection can be used;
b). Press the “MENU” to save and return to the upper
level menu.
27. “Headphone Volume Reduction”
If a headphone is plugged howling may happen when
the microphone is activated. “Headphone Volume
Reduction” function is used to suppress howling. If
enabled, the headphone audio signal will decrease
automatically by 18 dB.
a). Press the “
Õ / Ö ” button to select “Yes” or “No”;
b). Press the “MENU” to save and return to the upper
level menu.
28. “Floor Distribution Setting”
Enable/disable switch to floor channel automatically
when no interpretation channel is available.
a). Press the “ Õ / Ö ” button to select “Yes” or “No”;
b). Press the “MENU” to save and return to the upper
level menu.
29. “Ambient Microphone Setting”
(HCS-4100MC/50 does not have this function)
Enable/disable ambient microphone.
a). Press the “ Õ / Ö ” button to select enable/disable.

If “ Disable ” is selected, press the “MENU”
button to disable ambient microphone;

If “ Enable ” is selected, press the “MENU” button
to confirm and go to step b);
b). Press the “ Õ / Ö ” button to select a microphone ID;
c). Press the “MENU” button to save and return to the
upper level menu.
30. “Handheld Mic. PTT Setting”
Setup PTT mode for handheld microphone.
a). Press the “ Õ / Ö ” button to select “Yes” or “No”;
ƒ
If “Yes” is selected, force handheld microphone
to PTT mode;
ƒ
If “No” is selected, handheld microphone works
the same as the stem microphone;
b). Press the “MENU” button to save and return to the
upper level menu.
31. “2 CHs Unit Headphone Mode”
Setup headphone mode for congress unit
HCS-4335D/50.
a). Press the “ Õ / Ö ” button to select “Yes” or “No”;
ƒ If “ Yes ” is selected, the speaker will be muted
when both headphones are plugged;
ƒ If “ No ” is selected, the speaker will be muted
when headphone is plugged (one or both);