164
4.4.2 LCD configuration menu
When the “Interpretation setup” has been configured in
the CMU, and then the interpreter unit must be
configured:
If the interpreter unit has not been configured, the
LCD will display “UNIT NOT INSTALLED”;
If the interpreter unit has been configured, the
LCD will display the standby interface.
A
)
Accessing configuration menu
“UNIT NOT INSTALLED” interface
: press any
button to go to the menu configuration of the
interpreter unit;
Display standby interface
: press and hold the
message button (
), at the same time, clockwise
rotate the primary knob, to go to the menu
configuration of the interpreter unit.
The LCD will display the following figure:
In the menu operation of the interpreter unit:
Use the primary knob to run through all submenus;
Use “B” button to confirm/go to submenu;
Use “a” button to return/exit.
B
)
Menu configuration
The menu operation of the interpreter unit is as follows:
Step 1: setup operation language;
Step 2: setup conference room ID;
Step 3: setup booth number;
Step 4 to 8: select monitor channel a/b/c/d/e
language;
Step 9: Select to activate “SLOW” function or not;
Step 10: Select to activate “HELP” function or not;
Step 11: Select to activate “Auto Floor” function or
not;
Step 12: Select to display speaking time or not;
Step 13: setup auto relay booth quantity;
Step 14: setup auto relay booth number;
Step 15: finish.
Step 1: Setup operation language
Press the “B” button to setup the operation language,
i.e. the display language on the LCD:
1). Select the language between several languages:
Simplified Chinese, Traditional Chinese, English,
Korean, etc., by rotating the primary knob;
2). Press the “B” button to confirm and go to the next
step.
Step 2: Select conference room ID
1). Select the conference room ID by rotating the
primary knob, the interpreter unit and the main unit
must set the same ID;
2). Press the “B” button to confirm and go to the next
step or press “a” to return.
The above interface means that: the conference room
ID of the interpreter unit is 4, and the conference room
ID of the combined main unit is 4.
Step 3: Setup booth number
Setup the interpreter unit with the number of the booth
within which the interpreter unit is located, according to
the configuration in the CMU.
1). Select the booth number by rotating the Primary
knob, the range is limited by the configuration in
the CMU (refer to section 2.4.2);
2). Press the “B” button to confirm and go to the next
step or press “a” to return.
Содержание HCS-4100/50 Series
